How to set the flight settings for the Phantom 4RTK when using Edge2.

Question

What is the recommended flight setting for the phantom 4RTK when using Edge2？

Answer

Please refer to the this procedure.
Please refer to this procedure. This setting is recommended when using Edge2.

Recommend flight setting

Setting	Set to
Height	The most recommended is 37m (GSD 1cm)
Speed	2.9m/s (Max speed allowable)
Shooting Mode	TIMED Shooting
Finish	Return to home
Altitude Optimization（additionnal Oblique flight）	Enabled
Relative Height	0m
Camera Settings	Set to
Photo Ratio	3:2 (Fixation)
White Balance	Set to the conditions of the day
Gimbal Angle	-90
Shutter Priority	Enabled / 1000　（Fixation）
Distortion Correction	Disabled
Advanced Settings	Set to
Overlapping Rate (Side(holizontal)/Over)	60/80