FAQ
- How install Edge2 certificate/application unavailable case.
- How long does it take to process point cloud data?
- Unable to charge the battery
- Unable to distribute correction information when using a fixed station mode
- How to set the flight settings for the Mavic 3E when using Edge2.
- Error codes and Troubleshooting steps・Items to confirm
- How to combine multiple flight data into one data set.
- How to update Edge2.
- What is the maximum area that can be process at one time?
- Supported models for using the Edge2
- Unable to upload processed data to the project site via the Internet.
- How to update firmware via USB
- How to set the flight settings for the Matrice 4E when using Edge2.
- How to set the flight settings for the Phantom 4RTK when using Edge2.
- How to extract PPK log data.
- Unable to delete point data.
- Error code 0xA0500001 : PPK processing does not start
- Error code 0x90200000: Unable to read data from USB/SD card.
- How to do when the GNSS receiving status seems to be bad.
- Error code S-09: Temperature abnormal.
- Error code S-06/S-07: Power is forced to be off.
- Error code S-05:GNSS communication error
- Error code S-04: LTE communication error.
- Error code S-03: Wireless LAN communication error.
- Error code E1234 : Unable to read data from USB/SD card.
- Unable to receive GNSS correction information as a fixed station.
- No power supply